The filters are being applied...

Cascade magnets

Cascade magnets (hump magnets) filter undesired ferromagnetic (Fe) particles – such as iron and steel – out of granulates, fibres and coarser materials in high capacity free-fall chutes.
They are very robust and are used in the bulk, animal feed, plastics, ceramics and recycling industries. A magnetic hump can handle high capacities because the plate magnets are located along the outside, against the product chute, allowing the product to fall freely between them.

The cascade form of the housing forces the material toward the magnets. With this system the product passes three powerful magnetic fields in three cascade stages. The last magnet is normally made of Neoflux® (neodymium) to obtain an even better separation yield. Cleaning is manual (quick cleaning) or completely automatic by means of a pneumatic sequence circuit. The hump magnets continue to function even if the air supply is interrupted.

Magnetic humps/cascade magnets have capacities of up to 350 m³/h. The particle size is max. 50 mm.

Products

Cascade magnets manual quick cleaning

Suitable for the removal of large pieces of ferromagnetic contamination. The manually cleaned cascade magnet is used when cleaning frequency must not exceed 1x per day.

More information

Cascade magnets automatic cleaning

Can be used in an automatic production process for the removal of large ferromagnetic contamination. Automatic cleaning (with production stop).

More information