Pot magnets and magnetic hooks

Pot magnets and magnetic hooks are compact magnet systems with a single attracting surface.

They have a steel, brass, stainless steel or plastic shell. The steel shell prevents dispersion of the magnetic field and increases the magnetic force of the attracting surface. The shell - or pot - also provides better corrosion and chemical resistance. The maximum operating temperature ranges from 60 to 450 °C.

We supply pot magnets made of neodymium, samarium cobalt, AlNiCo and ferrite. See our range below.

  • Ohne bohren und schrauben zu befestigen
  • Zur Präsentation zum Ausstellen oder Aufhängen
  • Reduces number of assembly steps
  • Unbegrenzt nutzbar und verschiebbar
  • For picking up, positioning or holding products

Optimal magnetic holding force

10 products
  • In principle, magnets retain their magnetic force indefinitely.
  • Clean pole surfaces and a flat workpiece ensure optimal tensile force.
  • Small cracks in magnetic material have no effect.

Factors that adversely affect the functioning of pot magnets:

  • Heat, shocks, external magnetic fields and corrosion;
  • Different alloys influence the magnetic force because of the permeability of the alloyed material; The higher the carbon content of the alloy components, the smaller the magnetic attraction force;
  • When the roughness of the surface of the workpiece increases;
  • An air gap and non-magnetic material between magnet and workpiece;
  • Through exposure to prolonged radioactive and gamma radiation.
suitable for gluing

Topfmagnete Flach

Flat pot magnets are available in neodymium, samarium cobalt, ferrite and AlNiCo. These magnets are suitable for gluing.

<p>Flat pot magnets are available in neodymium, samarium cobalt, ferrite and AlNiCo. These magnets are suitable for<strong> </strong>gluing.</p>
optimal attracting surface

Topfmagnete mit versenktem Loch

Compact magnet systems with a steel shell and a countersunk hole for easy mounting. The bolt with a flat countersunk head falls flush with or in the top of the magnet. This optimizes the attracting surface of the pot magnet.

<p>Compact magnet systems with a steel shell and a countersunk hole for easy mounting. The bolt with a flat countersunk head falls flush with or in the top of the magnet. This optimizes the attracting surface of the pot magnet.</p>
screwable at a high torque

Topfmagnete mit Zylinderbohrung

Compact magnet systems with a steel shell and a continuous cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded.

<p>Compact magnet systems with a steel shell and a continuous cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded.</p>
low flush height

Topfmagnete mit Innengewinde

Compact magnetic systems with a steel shell and internal thread for easy installation in places with low installation height. When mounted, the pot magnet remains unloaded.

<p>Compact magnetic systems with a steel shell and internal thread for easy installation in places with low installation height. When mounted, the pot magnet remains unloaded.</p>
simple assembly

Topfmagnete mit Gewindebolzen

Compact magnet systems with a steel shell and a threaded end for easy mounting.

<p>Compact magnet systems with a steel shell and a threaded end for easy mounting.</p>
simple construction by threaded bush

Topfmagnete mit Gewindebuchse

Compact magnet systems with a steel shell and a threaded bush for easy mounting.

<p>Compact magnet systems with a steel shell and a threaded bush for easy mounting.</p>
gluing, pressing, shrinking

Topfmagnete zylindrisch - h6

Pot magnets with fit tolerance h6 are available in various dimensions and types. Suitable for gluing, pressing and shrinking.

<p>Pot magnets with fit tolerance h6 are available in various dimensions and types. Suitable for gluing, pressing and shrinking.</p>
for in-store advertising and shop windows

Magnethaken

Compact magnet systems with a hook and a steel or plastic shell. With these strong magnetic hooks, you can easily attach all kinds of products to any steel surface.

<p>Compact magnet systems with a hook and a steel or plastic shell. With these strong magnetic hooks, you can easily attach all kinds of products to any steel surface.</p>
inconspicuous in white

Ösenmagnete

Compact magnet systems with a plastic shell and a suspension eye. The white plastic shell allows these eyelet magnets to be less conspicuous and highly suitable for use in stores and shop windows for the presentation of promotional materials.

<p>Compact magnet systems with a plastic shell and a suspension eye.&nbsp;The white plastic shell allows these eyelet magnets to be less conspicuous and<strong> </strong>highly suitable for use in stores and shop windows for the presentation of promotional materials.</p>
for vertical assembly

Topfmagnete gummimantelt

Compact magnet systems with a steel shell and rubber coating for more shear force. Rubberized pot magnets are perfectly suited for easily damaged surfacesto prevent scratches.

<p>Compact magnet systems with a steel shell and rubber coating for more shear force. Rubberized pot magnets are perfectly suited for easily damaged surfaces<strong></strong>to prevent scratches.</p>

Contact our specialists

Thanks to the different types, there is always a suitable magnet to be found. Goudsmit is happy to provide installation recommendations or help you choose the right pot magnet.

Magnetic filtering product specialists | Goudsmit Magnetics

Ron Pollaerts

Sales

Any questions? Send us an e-mail or call one of our staff: +31 (0)40 221 3283.