The filters are being applied...

Undesired magnetism in production process is costly

At the Maintenance Next trade fair in Rotterdam, Goudsmit Magnetics of Waalre will give a demonstration of a demagnetization process at Stand 2414. The consequences of undesired magnetism can be very costly. Contaminating chips or punched parts sticking to a die are undesirable; they interrupt production, which costs time and money. Not being able to weld an oil pipeline can shut down entire industries. For this problem,
a demagnetization specialist is regularly called in to handle the situation on site. This is often done with a mobile demagnetization system designed by Goudsmit, consisting of a mobile control unit and 100 to 200 metres of special cable, wound on a mobile trolley. This is the solution for removing or neutralizing remanent magnetism. The cable is wrapped around the pipe or machine to form a coil, and then the flow of low-frequency current from the control box gradually neutralizes the magnetic field. Such problems occur in various industries, including the offshore, chemical, shipbuilding, transport (railways) and metal industries.


demagnetization.pipeline

DEMAGNETIZING TUNNEL

At manufacturing companies, such as those that process sheet metal, cutting dies gradually become magnetized from extensive use. Cutting edges have to work their way through extra material due to sticking chips. Regular demagnetization extends the life of dies. If this occurs regularly, it can be cost-effective to purchase a demagnetization unit yourself. This could be a demagnetization tunnel or table, for example. Both are available in combination with a belt conveyor system or driven roller conveyor. In such cases, a demagnetization tunnel or table in the overhaul workshop could be a solution. Demagnetization tunnels – low or high frequency – can also be used directly in production lines, such as those for nails and screws, rails or saw blades, as well as for the production of steel pipes or the application of insulation to pipes. Another application is a demagnetization tunnel for an ultrasonic or water-based cleaning process. In a continuous process, such tunnels efficiently remove undesired remanent magnetism.



demagnetizing tunnel

DEMAGNETIZATION ON LOCATION

For incidental cases, Goudsmit offers a demagnetization service in Waalre, or on location in production environments or even on-site at a customer’s location. A mobile demagnetization unit has been designed for this purpose that can be used for onshore and offshore welding and repair of pipes and pipelines. Or the demagnetization of products and machine parts that are difficult to transport or cannot be dismantled. Demagnetization specialists from Goudsmit eliminate undesired magnetism both at home and abroad.


in-house demagnetization

UNDESIRED RESIDUAL MAGNETISM

Undesired magnetism can result from various things, such as magnetic lifting of sheet metal or pipes. Other causes include magnetic crack detection and even mechanical machining processes such as milling, drilling and grinding. These can result in residual magnetism in a product, making precision, certified welding impossible.
In a nutshell, then, undesired residual magnetism costs time and money and has a negative impact on the quality of finished products.
Goudsmit demagnetization systems remove undesired magnetism or reduce it to a negligible level.

 

 
removing magnetism

For more information: mail: of call: +31(0)40-2213283