Minerals (fine)

For the production of fine minerals such as salt, feldspar, quartz, alumina (Al203) and titanium dioxide (TiO2) purity is of great importance. Because iron is found everywhere in nature there will always be traces of iron in the minerals. One place lots of minerals are used is the semiconductor manufacturing sector. When the mineral powder to be processed contains iron contamination, this causes problems in production. Our strongest magnetic drum separators remove very fine ferrous contamination from minerals and thus assure an iron-free finished product.

drum magnet for minerals

Products

External pole magnets manual quick cleaning

These external pole magnets filter ferromagnetic contamination from free-fall lines. Cleaning is quick and easy, by means of an extractor plate (quick cleaning).

More information

External pole magnets automatic cleaning

External pole systems are a good solution for applications with large amounts of ferrous contamination and where operator access is impossible. Automatic cleaning, without production stop.

More information

Cleanflows manual cleaning - Static

For magnetic filtration of small quantities of metal contamination from dry, free-flowing powders and granulates in non-pressurized pipes. Manual cleaning (quick cleaning).

More information

Pressure-tight Cleanflows manual cleaning - Static

For magnetic filtration of small quantities of metal contamination from dry, free-flowing powders and granulates in pipelines with a pressure of up to 1.5 bar. Manual cleaning (quick cleaning).

More information

Cleanflows semi-automatic cleaning - Static

For magnetic filtration of small quantities of metal contamination from dry, free-flowing powders and granulates in non-pressurized pipes. Semi-automatic cleaning (Easy-clean).

More information

Cleanflows automatic discontinuously cleaning - Static

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For dry, free-flowing powders and granulates. Automatic cleaning, with production stop.

More information

Cleanflows automatic discontinuously cleaning - Dust-proof - Static

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For dry, free-flowing, dusty powders and granulates. Automatic cleaning, with production stop.

More information

Cleanflows automatic continuously cleaning - Static

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For dry, free-flowing powders and granulates. Automatic cleaning, without production stop.

More information

Cleanflows manual cleaning - Rotating

For magnetic filtration of small quantities of metal contamination from poorly flowing (e.g. fatty) powders in non-pressurized pipes. Manual cleaning (quick cleaning).

More information

Cleanflows semi-automatic cleaning - Rotating

For magnetic filtration of small quantities of metal contamination from poorly flowing (e.g. fatty) powders in non-pressurized pipes. EHEDG certified. Semi-automatic cleaning.

More information

Cleanflows automatic discontinuously cleaning - Dust-proof - Rotating

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For poorly flowing (e.g. fatty) powders and granulates. Automatic cleaning, with production stop.

More information

Cleanflows automatic continuously cleaning - Rotating

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For poorly flowing (e.g. fatty) powders and granulates. Automatic cleaning, without production stop.

More information

Cascade magnets manual quick cleaning

Suitable for the removal of large pieces of ferromagnetic contamination. The manually cleaned cascade magnet is used when cleaning frequency must not exceed 1x per day.

More information

Cascade magnets automatic cleaning

Can be used in an automatic production process for the removal of large ferromagnetic contamination. Automatic cleaning (with production stop).

More information

Magnetic grids ferrite

Provide a quick indication of whether ferrous contamination is present. Simple, with a low price; not suitable for the food industry. Manual cleaning (quick cleaning not possible).

More information

Magnetic grids neodymium (Neoflux®)

These magnetic grids are suitable for all industries and provide a quick indication of whether even weakly ferromagnetic contamination is present. Very powerful. Quick cleaning through use of extractor tubes.

More information

Permanent bullet magnets

The most effective separation system in terms of price/quality. With powerful ferrite magnet core. Manual cleaning.

More information

Electro bullet magnets

Less powerful than permanent version, yet with fully automatic cleaning (with production stop) and therefore suitable for automatic production processes.

More information

Magnetic plates ferrite

Cost effective. Overbelt placement or installation against a free-fall line. Often used in the recycling industry or for protection of grinding mills. Not suitable for the food industry.

More information

Magnetic plates neodymium (Neoflux®)

Powerful and compact. For dry or wet use; also suitable for the food industry.

More information

Magnetic drum separators standard 3000 gauss

Applications in free-fall chutes for powders, granulates, fibres and coarse materials. Not suitable for the food industry.

More information

Magnetic filters, industrial

Robust filter for general applications. For filtering magnetic and weakly magnetic ferrous particles. Suitable for all industries. Manual cleaning (quick cleaning).

More information

Magnetic filters, industrial, pneumatic

Robust filter for filtering magnetic and weakly magnetic ferrous particles at larger diameters. Not suitable for the food industry. Semi-automatic cleaning.

More information

Magnetic filters, industrial, external pole

Very robust filter, suitable for filtering ferrous contamination out of products such as pulp in the paper industry. Large solids can also pass, because there is nothing to obstruct the passage. Manual cleaning.

More information

Magnetic bars neodymium (Neoflux®)

Magnetic bars and magnetic rods are the building blocks of many magnetic systems and are used to filter product streams for the removal of very fine ferromagnetic and weakly magnetic particles (from machined stainless steel or iron oxides, for example).

More information

Chute magnets

Chute magnets are used for powder streams in free-fall or chute applications; a simple solution for removal of ferromagnetic contamination.

More information