The filters are being applied...

Ceramic

Magnets are indispensable during production in the ceramic industry. As users' requirements are becoming increasingly stringent, the products must be completely metal-free. This can only be achieved with magnets. They prevent black speck and rust particles in the glaze and in finished products such as chamotte, quartz sand and feldspar. When the raw materials are used in the electronics industry, the use of magnets is nothing less than a technical requirement.

After all, only magnets are capable of removing particles as small as a few microns. This requires very strong and well-constructed magnetic filters. For convenient operation it is also important that captured metal parts are easy to remove. Goudsmit has developed the easy-clean Cleanflow magnets for this purpose.

The intensive use of raw materials is resulting in scarcity: high-quality raw materials are running out, as a result of which many industries are being forced to work with raw materials that are less pure and of lower quality, which means more metal particles must be removed. This places high demands on the magnetic separators. Drum magnets, industrial magnetic filters and Cleanflow magnets can all be used for this purpose. They penetrate completely into the product and can remove metal particles down to 30 μm from liquids, slurry and dry powders.

With a number of types this can even be done completely automatically and without production losses. The magnets provide continuous monitoring of your products and, thanks to their ingenious design and robust construction, require virtually no maintenance.

magnet for ceramics

Products

External pole magnets manual quick cleaning

These external pole magnets filter ferromagnetic contamination from free-fall lines. Cleaning is quick and easy, by means of an extractor plate (quick cleaning).

More information

External pole magnets automatic cleaning

External pole systems are a good solution for applications with large amounts of ferrous contamination and where operator access is impossible. Automatic cleaning, without production stop.

More information

Cleanflows manual cleaning - Static

For magnetic filtration of small quantities of metal contamination from dry, free-flowing powders and granulates in non-pressurized pipes. Manual cleaning (quick cleaning).

More information

Pressure-tight Cleanflows manual cleaning - Static

For magnetic filtration of small quantities of metal contamination from dry, free-flowing powders and granulates in pipelines with a pressure of up to 1.5 bar. Manual cleaning (quick cleaning).

More information

Cleanflows semi-automatic cleaning - Static

For magnetic filtration of small quantities of metal contamination from dry, free-flowing powders and granulates in non-pressurized pipes. Semi-automatic cleaning (Easy-clean).

More information

Cleanflows automatic discontinuously cleaning - Static

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For dry, free-flowing powders and granulates. Automatic cleaning, with production stop.

More information

Cleanflows automatic discontinuously cleaning - Dust-proof - Static

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For dry, free-flowing, dusty powders and granulates. Automatic cleaning, with production stop.

More information

Cleanflows automatic continuously cleaning - Static

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For dry, free-flowing powders and granulates. Automatic cleaning, without production stop.

More information

Cleanflows manual cleaning - Rotating

For magnetic filtration of small quantities of metal contamination from poorly flowing (e.g. fatty) powders in non-pressurized pipes. Manual cleaning (quick cleaning).

More information

Cleanflows semi-automatic cleaning - Rotating

For magnetic filtration of small quantities of metal contamination from poorly flowing (e.g. fatty) powders in non-pressurized pipes. EHEDG certified. Semi-automatic cleaning.

More information

Cleanflows automatic discontinuously cleaning - Dust-proof - Rotating

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For poorly flowing (e.g. fatty) powders and granulates. Automatic cleaning, with production stop.

More information

Cleanflows automatic continuously cleaning - Rotating

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For poorly flowing (e.g. fatty) powders and granulates. Automatic cleaning, without production stop.

More information

Cascade magnets automatic cleaning

Cascade magnets filter ferromagnetic contamination from coarse raw materials and provide optimal flow. The cascade arrangement forces the product to closely pass three plate magnets. Automatic cleaning.

More information

Magnetic grids neodymium (Neoflux®)

Magnetic grids are often placed at a pouring point and filter very fine magnetic and weakly magnetic ferromagnetic contamination from free-flowing powders and granulates. Often used for control purposes. Manual cleaning (quick cleaning).

More information

Permanent bullet magnets

The most effective separation system in terms of price/quality. With powerful ferrite magnet core. Manual cleaning.

More information

Electro bullet magnets

Less powerful than permanent version, yet with fully automatic cleaning (with production stop) and therefore suitable for automatic production processes.

More information

Magnetic plates ferrite

Cost effective. Overbelt placement or installation against a free-fall line. Often used in the recycling industry or for protection of grinding mills. Not suitable for the food industry.

More information

Magnetic plates neodymium (Neoflux®)

Powerful and compact. For dry or wet use; also suitable for the food industry.

More information

Magnetic drum separators standard 3000 gauss

Applications in free-fall chutes for powders, granulates, fibres and coarse materials. Not suitable for the food industry.

More information

Magnetic filters, industrial

Robust filter for general applications. For filtering magnetic and weakly magnetic ferrous particles. Suitable for all industries. Manual cleaning (quick cleaning).

More information

Magnetic filters, industrial, pneumatic

Robust filter for filtering magnetic and weakly magnetic ferrous particles at larger diameters. Not suitable for the food industry. Semi-automatic cleaning.

More information

Magnetic filters, industrial, external pole

Very robust filter, suitable for filtering ferrous contamination out of products such as pulp in the paper industry. Large solids can also pass, because there is nothing to obstruct the passage. Manual cleaning.

More information

Magnetic inspection rods

Magnetic inspection rods enable you to determine whether your product is contaminated with ferromagnetic (Fe) particles. The inspection rods attract very fine Fe particles as small as 30 microns.

More information

Gauss meter / teslameter

The gaussmeter/teslameter measures the local flux density, of a surface for example. The measurements can be displayed in units of tesla, gauss, kA/m or oersted.

More information

Magnetic bars neodymium (Neoflux®)

Magnetic bars are the building blocks of many magnetic systems and are used to filter product streams for the removal of very fine ferromagnetic and weakly magnetic particles (from machined stainless steel or iron oxides, for example).

More information

Chute magnets

Chute magnets are used for powder streams in free-fall or chute applications; a simple solution for removal of ferromagnetic contamination.

More information

Electromagnetic suspended magnets

Removal of large pieces of steel from bulk flows or in the recycling industry. Suitable for larger installation heights. Can be switched on and off.

More information