The filters are being applied...

Short description

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For poorly flowing (e.g. fatty) powders and granulates. Automatic cleaning, without production stop.

Read more

Characteristics

  • Rotor with magnetic bars
  • Automatic cleaning, continuous
  • Max. capacity 40 - 60 m³/h
  • Dust-proof
  • ATEX II 3D possible
Request an obligation-free offer Request advice
Cleanflows automatic continuously cleaning - Rotating SRCC 2
  • Cleanflows automatic continuously cleaning - Rotating in use
  • Cleanflows automatic continuously cleaning - Rotating brush
  • Cleanflows automatic continuously cleaning - Rotating SRCC 3D

Detailed product description

Application

The rotating, automatically cleaned Cleanflow/drawer magnets are very suitable for poorly flowing and/or fatty powders with a relatively large amount of metal particles and for less easily accessible configurations.

Design

These rotating Cleanflow magnets have multiple magnetic bars mounted in a rotor. These rotors consist of sealed stainless steel tubes inside of which a magnet bundle moves up and down.

Cleaning

The automatically cleaned Cleanflows have magnetic bars that move in a sealed tube and the captured iron (Fe) is discharged fully automatically. During this cycle, magnetic bars are pneumatically pushed to the OUT position after which the captured Fe particles fall into the tubes.

Automatic, time interval adjustable disposal of ferromagnetic parts – production can go on during cleaning, because there are always magnets in the product channel.

Filter

Product inlet/outlet size
Max. capacity

Products

PriceStockArticle numberProduct keyProduct inlet/outlet sizeMax. capacity
Cleanflow_magnet_rotary_SRCC-3232-09S-N-NA-F1H-L-B-B.jpgMore informationRequest an offerSRCC-3232-09S-N-NA-F1H-L-B-B#320 mm40 m³/h
Cleanflow_magnet_rotary_SRCC-3232-09S-N-NA-F1H-L-B-B.jpgMore informationRequest an offerSRCC-4040-11S-N-NA-F1H-L-B-B#400 mm60 m³/h

Videos

Options

  • suitable for high temperatures (to 100°C) - not available in combination with ATEX