The filters are being applied...

Short description

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For dry, free-flowing, dusty powders and granulates. Automatic cleaning, with production stop.

Read more


  • 2 magnetic grids, one above the other
  • Automatic cleaning, discontinuous
  • Capacity 30 - 90 m³/h
  • Dust-proof
  • ATEX II 1/2 D
Request an obligation-free offer Request advice
Cleanflows automatic discontinuously cleaning - Dust-proof - Static SECD 1
Cleanflows automatic discontinuously cleaning - Dust-proof - Static SECD 2
Cleanflows automatic discontinuously cleaning - Dust-proof - Static brush

Detailed product description


The static, automatic, discontinuously cleaning, dust-tight Cleanflows are suitable for dusty, free-flowing powders and granulates with a relatively large amount of metal particles and for less easily accessible configurations. Not suitable for sticky/fatty powders, because they can result in clogging.


The static, automatically cleaned Cleanflow magnets have two magnetic grids in a cascade arrangement, just like the manually cleaned types. This type is made completely dust-proof.


The automatically cleaned Cleanflow/drawer magnets have magnetic bars that move in a sealed tube and the captured iron (Fe) is discharged fully automatically. During this cycle, magnetic bars are pneumatically pushed to the OUT position after which the captured Fe particles fall into the tubes.

Automatic disposal of ferromagnetic parts - production must stop during cleaning. Magnets bars are automatically blown out of the product channel inside their enclosing pneumatic tubes, thereby loosening the caught ferrous particles in the product channel. Therefore, a valve box should always be mounted under the Cleanflow.


Valve box
Product inlet/outlet size



  • suitable for high temperatures (to 120°C) - not available in combination with ATEX
  • integrated valve box for Fe-parts disposal
  • Siemens LOGO! control