The filters are being applied...

Short description

Suitable for use in applications with large quantities of metal contamination and where operator access is impossible. For dry, free-flowing powders and granulates. Automatic cleaning, with production stop.

Read more

Characteristics

  • 1 Row of Ø50 mm bars
  • Automatic cleaning, discontinuous
  • Capacity 30 - 110 m³/h
  • Pressure-tight to 0.5 bar
  • Atex zone 20/22
Request an obligation-free offer Request advice
Cleanflows automatic discontinuously cleaning - Static SECA
  • Cleanflows automatic discontinuously cleaning - Static SECA 1
  • Cleanflows automatic discontinuously cleaning - Static SECA 2
  • easyclean-aut7789.jpg
  • Cleanflow_filter_magnet_SECA_studio3_product_zoom.jpg
  • Cleanflow_filter_magnet_SECA_studio5_bar_welding.jpg
  • Cleanflow_filter_magnet_SECA_studio5_bar_welding.jpg

Detailed product description

Application

The static, automatic, discontinuously cleaning Cleanflow/drawer magnets are suitable for free-flowing powders and granulates with a relatively large amount of metal particles and for less easily accessible configurations. Not suitable for sticky/fatty powders, because they can result in clogging.

Design

The static, automatic Cleanflow magnets contain 1 row with thick magnetic bars of Ø50 mm. This results in optimal capture of iron particles. These bars are sealed stainless steel tubes inside of which a magnet bundle moves up and down.

Cleaning

The automatically cleaned Cleanflows have magnetic bars that move in a sealed tube and the captured iron (Fe) is discharged fully automatically. During this cycle, magnetic bars are pneumatically pushed to the OUT position after which the captured Fe particles fall into the tubes.

Automatic disposal of ferromagnetic parts - production must stop during cleaning. The entire magnet system is brought out of the product channel automatically and is automatically cleaned of caught ferrous particles there.

Filter

Control
ATEX
Product inlet/outlet size
Max. capacity

Videos

Options

  • suitable for high temperatures (to 120°C) - not available in combination with ATEX
  • suitable for ATEX zone 20/21
  • integrated valve box for Fe-parts disposal
  • Siemens LOGO! control