The filters are being applied...

Short description

For magnetic filtration of small quantities of metal contamination from dry, free-flowing powders and granulates in non-pressurized pipes. Manual cleaning (quick cleaning).

Read more


  • 2 magnetic grids, one above the other
  • Manual quick cleaning
  • Capacity 3 - 60 m³/h
  • Types basic/food
  • ATEX II 1/2 D
Request an obligation-free offer Request advice
Cleanflows manual cleaning - Static open WH
  • Cleanflows manual cleaning - Static hydroform
  • Cleanflows manual cleaning - Static square
  • Cleanflows manual cleaning - Static food
  • Cleanflows manual cleaning - Static square carbid
  • Cleanflows manual cleaning - Static brush

Detailed product description


This type of static Cleanflow/drawer magnet is suitable for dry, free-flowing powders and granulates in free-fall pipes. Not suitable for sticky/fatty powders, because they can result in clogging.


The static, quick-cleaning Cleanflow magnets have two magnetic grids in a cascade configuration. All the standard types have extractor tubes for the bars (for 'quick cleaning'), so the captured iron (Fe) does not have to be 'wiped off' manually.


  • Basic type: standard version and finish.
  • Food type: special hygienic version (food/pharma).
  • Pressure-tight type: the Cleanflows in this group are only for non-pressurised pipes. For pressure-tight Cleanflows up to 1,5 bar: see Pressure-tight Cleanflows group.


Once the product flow is stopped, the entire magnet unit must be removed from the product chute. Then the magnetic bars can be pulled out of the extractor tubes, causing the Fe particles to fall off of the extractor tubes.


In-/outlet shape



  • suitable for high temperatures (to 140°C) - not available in combination with ATEX
  • Steute safety switch
  • white door seal (instead of red)
  • adapters from square to round