The filters are being applied...

Short description

Robust filter for general applications. For filtering magnetic and weakly magnetic ferrous particles. Suitable for all industries. Manual cleaning (quick cleaning).

Read more

Characteristics

  • Capture Fe particles from 30 µm to 2 mm
  • Flanges DN50-DN200 (EN 1092-1)
  • Max. 10 bar / 140 °C
  • Magnetic bars Ø23 mm in extractor tube (Ø25 mm, 8000 gauss)
Request an obligation-free offer Request advice
Industrial Magnetic filters open
  • Industrial Magnetic filters easy clean open
  • Industrial Magnetic filters food
  • Industrial Magnetic filters brush

Detailed product description

Application

This magnetic filter is suitable for many industries; can also be used in the food industry when there is little risk of bacterial growth.

Design

The industrial magnetic filter is a very robustly built filter. The standard version has flat flanges of type DIN 2576 PN10 and a flat bottom.

Cleaning

Once the product flow is stopped, the entire magnet unit must be removed from the product chute. Then the magnetic bars can be pulled out of the enclosing extractor tubes (as a unit), causing the Fe particles to fall off of the extractor tubes.

For larger passages, cleaning of the magnetic bars is done in part by sliding them over guide rods and in part pneumatically, because filters of this size are too heavy to lift (cleaning is still performed completely manually).

Filter

Interface/connection dim's