The filters are being applied...

Short description

Robust filter for filtering magnetic and weakly magnetic ferrous particles at larger diameters. Suitable for all industries. Semi-automatic cleaning.

Read more


  • Capture Fe particles from 30 µm to 2 mm
  • Flanges DN150-DN300 (EN 1092-1)
  • Max. 10 bar / 140 °C
  • Magnetic bars in tube (Ø34 mm, 9400 gauss)
Request an obligation-free offer Request advice
Magnetic filters, industrial, pneumatic SFNP
  • Magnetic filters, industrial, pneumatic SSFNP studio
  • Magnetic filters, industrial, pneumatic SSFNP top
  • Magnetic filters, industrial, pneumatic SSFNP bars
  • Magnetic filters, industrial, pneumatic brush

Detailed product description


This magnetic filter is suitable for many industries; can also be used in the food industry when there is little risk of bacterial growth. This type of filter is used for larger diameters, because for this size of filter the magnet unit is too heavy to lift. For example removing steel wire from paper pulp (reed the blog)


Standard industrial pneumatic magnetic filters are available for pipe sizes from DN150 and fitted with flanges of type DIN 2576 PN10. The neodymium magnetic bars in this type move inside a sealed tube.
Cleaning of the magnetic rods is performed partly manually (over guide rods) and partly automatically (pneumatically controlled).


Once the product stream is stopped, the complete magnet unit can be manually slid over the guide rods out of the product channel. Then the magnetic rods are pneumatically 'blown' to the OUT position, at which point the Fe particles fall off of the tubes.


Interface/connection dim's