AlNiCo pot magnets

Short description

AlNiCo pot magnets are coated by a steel pot, in between which a non-magnetisable raw material has been inserted. Applicable for very high operating temperatures up to around 450 °C.

Characteristics

  • Extremely high temperature resistance
  • Enclosed in steel pot
Request an obligation-free offer Request advice
AlNiCo pot magnets

Detailed product description

AlNiCo pot magnets are coated by a steel pot, in between which a non-magnetisable raw material (brass or aluminium) has been inserted.
These pot magnets can be used in situations where high temperatures are used, up to 450 °C. At these temperatures a magnetic loss of approx. 30 - 40% occurs that is recovered however, as soon as the magnet has cooled off to room temperature.

Filter

Execution
Holding force
Diameter (D)
Height (H)

Products

PriceStockArticle numberArticle numberExecutionHolding forceDiameterHeight
Potmagnet fit tolerance h6More informationRequest an offerGM16001Fit tolerance h62 N6 mm10 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16002Fit tolerance h64 N8 mm10 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16003Fit tolerance h68.5 N10 mm16 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16004Fit tolerance h612 N13 mm18 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16005Fit tolerance h620 N16 mm20 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16006Fit tolerance h640 N20 mm25 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16007Fit tolerance h660 N25 mm30 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16008Fit tolerance h6160 N32 mm35 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16009Fit tolerance h6240 N40 mm45 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16010Fit tolerance h6400 N50 mm50 mm
Potmagnet fit tolerance h6More informationRequest an offerGM16011Fit tolerance h6660 N63 mm60 mm
neodymium-pot-magnet-with-countersunk-hole-dimensions_267x200.pngMore informationRequest an offerGM16201Countersunk hole30 N19.1 mm7.5 mm
neodymium-pot-magnet-with-countersunk-hole-dimensions_267x200.pngMore informationRequest an offerGM16202Countersunk hole40 N28.6 mm8.5 mm
neodymium-pot-magnet-with-countersunk-hole-dimensions_267x200.pngMore informationRequest an offerGM16203Countersunk hole80 N38.1 mm10.4 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16301Threaded end2 N6 mm20 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16302Threaded end4 N8 mm20 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16303Threaded end8.5 N10 mm20 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16304Threaded end12 N13 mm20 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16305Threaded end12 N16 mm20 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16306Threaded end12 N20 mm25 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16307Threaded end60 N25 mm35 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16308Threaded end160 N32 mm40 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16309Threaded end240 N40 mm50 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16310Threaded end400 N50 mm60 mm
alnico-potmagnet-in-steel-housing-with-threaded-end-dimensions_267x200.pngMore informationRequest an offerGM16311Threaded end660 N63 mm65 mm