In-/outlet shape

Product inlet/outlet size

Pressure-tight Cleanflows - manual cleaning - Static

Suitable for magnetic filtering of small amounts of fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall and low-pressure transport pipes up to 1.5 bar.

Industrial finish - grit blasting Ra 3 µm.

  • Manual quick cleaning
  • Pressure-tight up to 1.5 bar
  • Magnetic bars in extractor tube (Ø23|Ø25 mm, 10,700 | 8000 gauss)
  • 2 magnetic grids, placed in cascade
  • Capacity 2 - 30 m³/h
Filter products

Square product in-/outlet • Quickly find your product variant via the filter

• Click on a product variant to find its available accessories, spare parts, data sheet, drawings and other downloadable product information

• Scroll to the section below the first 3 variants to find an animation video and more detailed product descriptions

3 variants

Product inlet/outlet size : #120 mm

Price on request

SECF-P-1212-05E-N-F1m-W-B-B
Article number SECFP12030
Stock 0
Capacity 2 to 6 m³/h
No of bars 5 (2+3)
Weight 8 kg
More info..
  • Specification
  • Accessories
  • Videos
  • Downloads
  • Request a quote or order

Product inlet/outlet size : #180 mm

Price on request

SECF-P-1818-07E-N-F1m-W-B-B
Article number SECFP18030
Stock 0
Capacity 7 to 18 m³/h
No of bars 7 (3+4)
Weight 13 kg
More info..
  • Specification
  • Accessories
  • Videos
  • Downloads
  • Request a quote or order

Product inlet/outlet size : #250 mm

Price on request

SECF-P-2525-09E-N-F1m-W-B-B
Article number SECFP25030
Stock 0
Capacity 12 to 30 m³/h
No of bars 9 (4+5)
Weight 19 kg
More info..
  • Specification
  • Accessories
  • Videos
  • Downloads
  • Request a quote or order

Powders & granulates in low-pressure lines up to 1.5 bar

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall and low-pressure pipelines up to 1.5 bar.

 

NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

 

Hygienic versions are only available upon request.

Pressure-tight Cleanflow magnetic separator SECFP - manual cleaning | Goudsmit Magnetics

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.

 

Summary of important specifications

  • 2 Magnetic grids, placed staggered one above the other.
  • Extractor bars Ø25/Ø23 mm for 'quick cleaning'.
  • Magnet quality N-42, 8,000 gauss on tube Ø25.
  • Housing pressure-tight up-to 1.5 bar.
  • Materials in contact with product: AISI316(L).
  • Finish: grit blasted.
  • Material gaskets: Silicone EC1935 / FDA.

Pressure-tight Cleanflow drawer magnet SECFP - manual cleaning | Goudsmit Magnetics

Available accessories & options

Options

  • High temperatures versions - to 140°C - not available in combination with ATEX
  • Steute door safety switch - for detecting if the separator is closed
  • White door seal instead of red
  • Inlet/outlet adapter pieces from square to round

 

Online accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Pressure-tight Cleanflow drawer magnet SECFP - manual cleaning | Goudsmit Magnetics

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?

The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.

 

The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.

 

How does the cleaning / iron discharging work?

Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.

 

Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.


Cleaning / iron discharging sequence

  1. Stop the product flow.
  2. Loosen the fastener clamps.
  3. Shove the complete magnet unit out of the housing.
  4. Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface.
    Catch the ferrous particles that now will fall off the tubes and dispose them.
  5. Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid.
  6. Shove the magnet unit back into the extractor unit.
  7. Shove the complete magnet unit back into the housing.
  8. Tighten the fastener clamps.
  9. Restart the product flow.

Round product in-/outlet • Quickly find your product variant via the filter

• Click on a product variant to find its available accessories, spare parts, data sheet, drawings and other downloadable product information

3 variants

Product inlet/outlet size : Ø100 mm

Price on request

SECF-P-D100-05E-N-F1m-W-B-B
Article number SECFQ10030
Stock 0
Capacity 2 to 6 m³/h
No of bars 5 (2+3)
Weight 9.3 kg
More info..
  • Specification
  • Accessories
  • Videos
  • Downloads
  • Request a quote or order

Product inlet/outlet size : Ø150 mm

Price on request

SECF-P-D150-07E-N-F1m-W-B-B
Article number SECFQ15030
Stock 0
Capacity 7 to 18 m³/h
No of bars 7 (3+4)
Weight 15 kg
More info..
  • Specification
  • Accessories
  • Videos
  • Downloads
  • Request a quote or order

Product inlet/outlet size : Ø200 mm

Price on request

SECF-P-D200-09E-N-F1m-W-B-B
Article number SECFQ20030
Stock 0
Capacity 12 to 30 m³/h
No of bars 9 (4+5)
Weight 23 kg
More info..
  • Specification
  • Accessories
  • Videos
  • Downloads
  • Request a quote or order

Added

Product key:
Article number:
Quantity:

Oops!

Something went wrong: the product could not be added to your shopping cart. Please try it again!

Price on request

Price on request

* We can deliver this article within {0}. We will keep you informed of the exact delivery date.
Please enter a valid number of items
Minimum order quantity Price per unit Discount percentage