The filters are being applied...

Short description

For magnetic filtration of small quantities of metal contamination from dry, free-flowing powders and granulates in pipelines with a pressure of up to 1.5 bar. Manual cleaning (quick cleaning).

Read more

Characteristics

  • 2 magnetic grids, one above the other
  • Manual quick cleaning
  • Capacity 2 - 30 m³/h
  • Pressure-tight to 1.5 bar
  • Atex II 1/2 D
Request an obligation-free offer Request advice
Pressure-tight Cleanflows manual cleaning - Static
  • Cleanflows manual cleaning - Static brush
  • Pressure-tight Cleanflows manual cleaning - Static SECFP
  • Pressure-tight Cleanflows manual cleaning - Static closed

Detailed product description

Application

This pressure-tight Cleanflow/drawer magnet is a variant of the manually cleaned Cleanflow series which has been made suitable for use in pipelines with a pressure of up to 1.5 bar. The filter is suitable for dry, free-flowing powders and granulated products, such as plastics, flour and sugar, in all industries.
However, it is not available in (food/pharma) EC1935/2004 / EHEDG version.

Design

Cleanflow magnets have two magnetic grids, in cascade arrangement, as standard. All the standard types have extractor tubes for the bars, so the captured iron (Fe) does not have to be 'wiped off' manually.

Cleaning

Once the product flow is stopped, the entire magnet unit must be removed from the product chute. Then the magnetic bars can be pulled out of the extractor tubes (as a unit), causing the Fe particles to fall off of the extractor tubes.

Filter

In-/outlet shape
Size
Capacity

Options

  • Steute safety switch
  • white door seal (instead of red)
  • adaptors from square to round