Pot magnets with threaded end

Compact magnet systems with a steel shell and with a threaded end for easy mounting. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.
Pot magnets with threaded end are available in various sizes in neodymium and ferrite.

  • Available in various qualities
  • Easy to install
  • Deliverable from stock
  • Buy magnets online
Filter products

Neodymium The strongest magnet type

3 variants
Product variant

€ 2,22

PM-TE-N-SG-D10x4.5xM4x8
Article number GM17622
Stock 300
Mounting interface Threaded end M4
Thickness 4.5 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 2,37

PM-TE-N-SG-D13x4.5xM5x8-HQ
Article number GM17623
Stock 123
Mounting interface Threaded end M5
Thickness 4.5 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 2,85

PM-TE-N-SG-D16x4.5xM6x8
Article number GM17624
Stock 386
Mounting interface Threaded end M6
Thickness 4.5 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.

Neodymium pot magnet with threaded end | Goudsmit Magnetics

When does loss of magnetic strength occur?

Neodymium pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.

External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Neodymium pot magnet with threaded end | Goudsmit Magnetics

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.

Neodymium pot magnet with threaded end | Goudsmit Magnetics

Neodymium (continued) The strongest magnet type

3 variants
Product variant

€ 4,18

PM-TE-N-SG-D20x6xM6x10
Article number GM17625
Stock 98
Mounting interface Threaded end M6
Thickness 6 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 5,99

PM-TE-N-SG-D25x7xM6x10
Article number GM17626
Stock 107
Mounting interface Threaded end M6
Thickness 7 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 8,33

PM-TE-N-SG-D32x7xM6x10
Article number GM17627
Stock 48
Mounting interface Threaded end M6
Thickness 7 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order

Ferrite Cost effective

3 variants
Product variant

€ 1,82

PM-TE-F-SG-D10x4.5xM3x7
Article number GM16701
Stock 14
Mounting interface Threaded end M3
Thickness 4.5 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 1,98

PM-TE-F-SG-D13x4.5xM3x7
Article number GM16702
Stock 0
Mounting interface Threaded end M3
Thickness 4.5 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 2,15

PM-TE-F-SG-D16x4.5xM3x7
Article number GM16703
Stock 113
Mounting interface Threaded end M3
Thickness 4.5 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order

Good magnetic properties, affordably priced

Ferrite pot magnets, also referred to as ceramic pot magnets, are fitted with a steel pot that provides shielding of the magnetic field. Ferrite pot magnets require only a minimal installation height. This provides constructive advantages.

Ferrite pot magnet flat with threaded end | Goudsmit Magnetics

When does loss of magnetic strength occur?

Ferrite pot magnets have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic force. This is not permanent; the force is restored when the magnet temperature returns to the normal ambient temperature. The magnet force of these pot magnets is lower than that of neodymium pot magnets.

External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Ferrite pot magnet flat with threaded end | Goudsmit Magnetics

Corrosion-resistant

Ferrite pot magnets do not corrode and are suitable for outdoor use.

Ferrite pot magnet flat with threaded end | Goudsmit Magnetics

Ferrite (continued) Cost effective

6 variants
Product variant

€ 2,20

PM-TE-F-SG-D20x6xM3x7
Article number GM16704
Stock 0
Mounting interface Threaded end M3
Thickness 6 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 2,47

PM-TE-F-SG-D25x7xM4x8
Article number GM16705
Stock 0
Mounting interface Threaded end M4
Thickness 7 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 2,72

PM-TE-F-SG-D32x7xM4x8
Article number GM16706
Stock 0
Mounting interface Threaded end M4
Thickness 7 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 4,18

PM-TE-F-SG-D47x9xM6x8
Article number GM16707
Stock 0
Mounting interface Threaded end M6
Thickness 9 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 5,66

PM-TE-F-SG-D57x10.5xM6x8
Article number GM16708
Stock 0
Mounting interface Threaded end M6
Thickness 10.5 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order
Product variant

€ 8,32

PM-TE-F-SG-D63x14xM6x15
Article number GM16709
Stock 0
Mounting interface Threaded end M6
Thickness 14 mm
More info..
  • Specification
  • Videos
  • Downloads
  • Request a quote or order

Added

Product key:
Article number:
Quantity:

Oops!

Something went wrong: the product could not be added to your shopping cart. Please try it again!

Price on request

Price on request

* We can deliver this article within {0}. We will keep you informed of the exact delivery date.
Minimum order quantity Price per unit Discount percentage