Suspension magnets

For installation above conveyor belts in the bulk transshipment or recycling industries. Removal of ferrous particles from raw materials containing relatively little metal. Cleaning manually or automatically.

  • Easy to install
  • Capture Fe particles from 1 mm
  • Various dimensions and flange types
  • Cleaning manually or automatically
  • Ferrite, neodymium or electromagnet

Suspension magnets

4 products

Suspended magnets (block magnets) remove undesirable ferromagnetic (Fe) particles such as iron and steel from material flows containing relatively little Fe contamination. They are placed above flat or trough-shaped conveyor belts.

 

The metal particles are drawn out of the raw material flow and held by the magnet. This results in a pure iron fraction suitable for immediate reuse (recycling).

 

They are used to check incoming product flows and for the protection of machines, such as shredders and sieves.


When heavy metal contamination is present, it is better to use an overbelt magnet. This type continuously carries away the iron particles.

Cost effective

Magnetic plates ferrite

More info..
  • Max. installation height 140 mm
  • Low installation height
  • With neodymium or ferrite magnets
  • For recycling or metal separation

Cost-effective. Overbelt placement or installation against a free-fall line. Often used in the recycling industry or for protection of downstream equipment. Unsuitable for the food industry.

<p>Cost-effective. Overbelt placement or installation against a free-fall line. Often used in the recycling industry or for protection of downstream equipment. Unsuitable for the food industry.</p>
Watertight stainless steel housing

Magnetic plates neodymium

More info..
  • Max. installation height 180 mm
  • Low installation height
  • Completely stainless steel and watertight
  • For recycling or metal separation

Powerful and compact. For dry or wet use. Often used in the recycling industry or for protection of downstream equipment.

<p>Powerful and compact. For dry or wet use. Often used in the recycling industry or for protection of downstream equipment.</p>
Permanent magnetic field

Suspended permanent magnets

More info..
  • Max. installation height 400 mm
  • Capture Fe particles from 1 mm
  • Various dimensions and flange types
  • For belt width 400-1600 mm
  • Easy to install

Removal of pieces of steel in the recycling industry or for protection of grinding mills. For installation up to 300 mm above conveyor belt.

<p>Removal of pieces of steel in the recycling industry or for protection of grinding mills. For installation up to 300 mm above conveyor belt.</p>
Magnetic field can be switched on/off

Suspended electromagnets

More info..
  • Max. installation height 400 mm
  • Manual quick cleaning
  • Switchable (electromagnet)
  • Electrical power supply required
  • Max. temp. 80 °C

Removal of large pieces of steel from bulk flows or in the recycling industry. Suitable for larger installation heights. Can be switched on and off.

<p>Removal of large pieces of steel from bulk flows or in the recycling industry. Suitable for larger installation heights. Can be switched on and off.</p>

Need advice?


Our specialists are happy to help you.

Test center engineer Recycling | Goudsmit magnetics

Edwin Kurstjens

Application Specialist Magnetic Recycling

 

Edwin has over 10 years of experience in advising the best magnet solution for customers. He looks at your material, process and budget to make the correct choice for the best magnetic separator for your application.

 

Call or mail: +31(0)40 - 22 13 283

recycling@goudsmitmagnets.com